Company and Products: MPM was founded in 1970 and is located in Erlangen, Germany. 。 Specializing in high-precision balancing and measurement systems. For any axisymmetric rotating workpiece, Such as dynamic balancing measurement and correction of cutting tools, tool holders, grinding wheels, spindles, and the like. MPM can provide suitable dynamic balancing machines (instruments). ). From miniature motors as small as a toothpick to artificial satellites, and from dynamic balancing of individual components to balancing systems for fully automated production lines, MPM is capable of providing dynamic balancing solutions. MPM offers a wide range of products, with the two main categories being vertical dynamic balancers and portable dynamic balancers.

Vertical Dynamic Balancing Machine BMT-200 

Workpiece Product Range : Tool holder, cutting tool, grinding wheel Wait

Category:

• Based on the size and weight of the workpiece, it can be classified as Type 20, Type 40 and Type 100;
• According to the length of the workpiece, it can be classified into single-plane. Type 1 and double-plane Type 2
• Determine whether the operation display is on the dynamic balancing machine or with the meter.

Computer and printer interface displays can be classified as: S-type and TS-type

• Conversion sleeves (workholding fixtures) can be classified as either outer-diameter clamping (e.g., cutting tools, tool holders) or inner-diameter clamping (e.g., grinding wheels, gears).

Advantages:

50. This dynamic balancing machine can test both external-cylinder workpieces and internal-cylinder workpieces.

Dynamic imbalance amount (the main unit remains unchanged; only the conversion kit needs to be replaced) )

50. highest Dynamic balancing accuracy   For example < G1
50. Equipment Simple operation , Chinese Operation Interface Clear at a glance  
50. There is 6 ways to eliminate not Balance Quantity Method
50. 360° All Direction Dismantle machine , convenient Simple and quick tool loading/unloading system knife
50. Adaptation of the workshop Quick Start button Used for Power on /Shut down , clamp /Release , start /Stop ， Print 。
50. Can be printed A single-page test report or To Batch Document Printing Report
50. Can be in Marked on the report oneself Unique company name or L ogo.
50. Okay. Operation Command Set Save
50. Workpiece Identification is possible. Use a QR code Read Enter (through Selected scanner )
50. Casually A personal computer ( Windows 10) Then it's okay. Operation
50. According to Select Requirement Category 。

Knife handle BT/SK10, HSK25, HSK32, C3 Select TS20 type

         Knife handle BT/SK40, HSK63, C5 Select TS40 type

         Knife handle BT/SK50, HSK100, C8 Select TS100 type

50. Operation Quick: Arrange Machine, Connectivity , do Move Balance, end.
50. Flexibility: Operation and Location Feel free to choose. 。 Lightweight and seismic-resistant design, machine weight Only Approximately 40 kilograms ， Use during test drive Just use the weight block. With Calibration Finished ， No need Use Calibration Machine.
50. Other competitors Use “Hard Arrange ”， The machine weighs approximately 200 kilograms, and transportation The cost is high.

Hard Arrange machine Calibration is also necessary. A calibration machine. Every time Shift All need to be recalibrated.

50. In Price of similar products Comparison in , than We have competitors. Approximately 20-30 % advantage.

Portable Balancing Machine BMT150M/M240

Workpiece Product Range ： Spindle, lathe, milling machine, Grinding machine, gear Wait

Category: B MT150 Single plane, BMT240 Dual-Plane

Advantages:

50. This dynamic balancing machine can perform standalone tests at high rotational speeds ( 90,000 rpm)

Dynamic balancing of shaft-type components can also be performed directly on various machine tools.

50. It consists of a portable dynamic balancing instrument, a vibration sensor, and a rotational speed sensor.
50. Depending on the intended use, one can adopt

1. Additional dynamic balancing screw
2. Install the dynamic balancing ring with adjustment shims.

Perform precise correction of the unbalance.

50. The corrected unbalance is greater than 95%.
50. Equipped with a touchscreen for easy operation.
50. Compact and lightweight design, suitable for use anywhere.
50. Can be connected to a computer printer.
50. Imbalance can be corrected using several software tools.